Prices from named national guides
Mold Removal Cost in Denton: The Assessor's Bill, the Remediator's Bill and the Repairs
Mold removal cost in Denton usually arrives as two invoices, because Texas keeps the assessment company and the remediation company apart on larger jobs. No public record shows what mold companies in Denton charge, so this page leans on national cost guides and names each one beside its number.
HomeGuide (2026) puts mold removal at $500–$1,500 for 10 to 100 square feet and $1,500–$6,000 for 100 to 300. A mold inspection runs $300–$650 (HomeGuide, 2023) or $450–$800 (Fixr, 2025). On a licensed Texas job, expect the assessor and the remediator to bill separately.
Denton mold removal cost by step and area
| Step or area | Typical range | Guide and year |
|---|---|---|
| Mold inspection, average-size home | $300–$650 | HomeGuide, 2023 |
| Mold inspection with testing | $450–$800 | Fixr, 2025 |
| Air sample, per test | $100–$300 | HomeGuide, 2023 |
| Removal, 10–100 sq ft | $500–$1,500 | HomeGuide, 2026 |
| Removal, 100–300 sq ft | $1,500–$6,000 | HomeGuide, 2026 |
| Removal, 300–1,000 sq ft | $6,000–$15,000 | HomeGuide, 2026 |
| Bathroom | $500–$2,000 | HomeGuide, 2026 |
| Attic, part of it | $1,500–$6,000 | HomeGuide, 2026 |
| AC system or ducts | $2,000–$10,000 | HomeGuide, 2026 |
| Walls | $1,000–$12,000 | Fixr, 2025 |
| Water damage and mold in one job | $2,700–$10,000 | Fixr, 2025 |
| Whole house | $15,000–$30,000 | HomeGuide, 2026 |
| New drywall afterward, per sq ft | $1.50–$3.50 | HomeGuide, 2026 |

Why mold removal cost in Denton comes in two parts
On a job of 25 contiguous square feet or more, Texas requires a remediator holding a state license, and the plan and the final check come from a separate licensed assessor (Texas Occupations Code Secs. 1958.101, 1958.155). So the assessor bills for the inspection, any samples and the written protocol, then again for the post-remediation assessment that decides clearance. The remediator bills for containment, removal, cleaning and drying. Rebuilding walls, ceilings or insulation is usually a third line, from either the remediator or a general contractor.
Under 25 contiguous square feet, none of that is required. Many small bathroom or closet jobs are priced as a single visit.
What moves a Denton bill up or down
- Square footage. HomeGuide (2026) prices removal at $15–$30 per square foot, so the size of the affected area sets most of the total.
- The attic. Air handlers and ducts often sit in Denton attics, where summer heat makes the work slower and insulation may have to come out. HomeGuide lists part of an attic at $1,500–$6,000.
- The cooling system. Mold inside an air handler or ducts runs $2,000–$10,000 (HomeGuide, 2026), and the system cannot run while it is being cleaned.
- Storm water. When a roof leak or flood soaked the house first, drying and mold are often one job; Fixr (2025) lists $2,700–$10,000 for both together.
- Repairs. New drywall runs $1.50–$3.50 per square foot and insulation $1.00–$4.50 (HomeGuide, 2026).
Reading a Texas mold remediation bid
Before work starts, Texas law requires a written work analysis listing the rooms or areas, the quantities of material to be removed or cleaned, and the method for each (Sec. 1958.151). Hold every bid against it: if one remediator plans to remove twice the drywall another does, the protocol should explain why. Check that the assessor and the remediator are separate companies, and look both up on the TDLR license search. Licensees must hand you the state's Consumer Mold Information Sheet before any mold work begins (TDLR). Ask for the warranty terms in writing.
For what each step involves, see mold remediation in Denton, step by step.
Where these numbers come from
HomeGuide and Fixr survey costs on their own, and their bathroom and whole-house figures sit close together, which makes each a fair check on the other. Neither is a Denton figure, and this site does not make up local ones. If a bid lands far outside a band, ask the company to point to what in your house pushes it there; a high number is not proof of a bad bid.
Cost questions
Do I pay for the clearance check separately?
Usually, yes. The post-remediation assessment that decides clearance is done by the licensed assessor, who is a different company from the remediator on a Texas job of 25 contiguous square feet or more. Ask the assessor at the start whether the clearance visit and any samples are in the first price.
Is mold testing worth paying for if I can see the mold?
Usually not. The EPA says that in most cases, if mold is visible, sampling is unnecessary, and the CDC does not recommend mold testing. Sampling earns its fee for clearance after remediation, for a hidden source behind a smell, or when a sale or a dispute needs a written record.
What does a small bathroom job cost?
HomeGuide (2026) puts bathroom mold removal at $500–$2,000, and Fixr (2025) at $500–$1,500. Surface growth on grout or a ceiling under 10 square feet is often something you can clean yourself, per EPA guidance, once the fan or leak behind it is fixed.
What are you seeing, and where?
A line or two is plenty: the room, roughly how big the patch is, and whether there was a leak, a storm or an AC problem first. Say if you rent, or if you are buying or selling. It goes to one independent mold specialist in the Denton area, who follows up with you.